
Watson Atlas Tough Guy
Watson Gloves
EUCO QWIKJOINT UVR represents a new generation of polyurea technology with features and benefits unlike any other polyurea joint filler on the market. EUCO QWIKJOINT UVR resists fading from ultraviolet light greater than any existing product on the market. It is a fast-setting, semi-rigid polyurea, primarily used for filling construction and control joints in industrial and commercial concrete floors. EUCO QWIKJOINT UVR can be shaved flush with the floor shortly after placement or up to 24 hours later. EUCO QWIKJOINT UVR supports and protects joint edges from heavy loads and wheel traffic, reducing spalling of the joint edges. EUCO QWIKJOINT UVR is available in 33 standard colors and in a Neutral Base, that can be colored on site with EUCLID UNIVERSAL COLOR PACKS; available in the same 33 colors.
Joint Backing: To provide proper load transfer, EUCO QWIKjoint UVR must be filled full depth of the joint or crack. Do not use backer rod or other fill material for the purpose of reducing volume. Dried silica sand, 1/16” to 1/8” (1.5 to 3 mm), may be used to fill the crack at the bottom of the joint and prevent three-sided adhesion.
EUCO QWIKJOINT UVR represents a new generation of polyurea technology with features and benefits unlike any other polyurea joint filler on the market. EUCO QWIKJOINT UVR resists fading from ultraviolet light greater than any existing product on the market. It is a fast-setting, semi-rigid polyurea, primarily used for filling construction and control joints in industrial and commercial concrete floors. EUCO QWIKJOINT UVR can be shaved flush with the floor shortly after placement or up to 24 hours later. EUCO QWIKJOINT UVR supports and protects joint edges from heavy loads and wheel traffic, reducing spalling of the joint edges. EUCO QWIKJOINT UVR is available in 33 standard colors and in a Neutral Base, that can be colored on site with EUCLID UNIVERSAL COLOR PACKS; available in the same 33 colors.
Joint Backing: To provide proper load transfer, EUCO QWIKjoint UVR must be filled full depth of the joint or crack. Do not use backer rod or other fill material for the purpose of reducing volume. Dried silica sand, 1/16” to 1/8” (1.5 to 3 mm), may be used to fill the crack at the bottom of the joint and prevent three-sided adhesion.