SKU: 115885
Buddy Rhodes $53.50NOTE: Due to recent raw material changes, Water Reducer 420 has been DISCONTINUED. Water Reducer 444 is a suitable alternative for all applications. Dosage rates are similar, but test batches should be made to confirm optimal dosage for specific applications.
Water Reducer 420 is a plasticizer designed to be especially effective with mixes that have a high content of finer sands and particles. It can be used to achieve a homogeneous flow in mixes with high fines, a softer flow in mixes like GFRC, and can soften a mix slightly without imparting too much sag or slump. Water Reducer 420 is often used to temper mixes that have been plasticized with Water Reducer 310 or Water Reducer 205. This combination of water reducers allows the fabricator a wide range of possibilities in responding to environmental conditions.
Dosage Rate: 0.1- 2% of Cement Weight
The ultimate indicator of an overdosage of plasticizer is segregation of the mix. Make test batches prior to production to ensure optimum dosage.
Adding Water Reducers will increase workability of concrete mixes that have a low water to cement ratio. Maintaining a low water to cement ratio is critical for reaching optimal strength in the cured matrix. Read our FAQ on selecting the correct Water Reducer here: Using Water Reducers In Artisan Concrete
Description
NOTE: Due to recent raw material changes, Water Reducer 420 has been DISCONTINUED. Water Reducer 444 is a suitable alternative for all applications. Dosage rates are similar, but test batches should be made to confirm optimal dosage for specific applications.
Water Reducer 420 is a plasticizer designed to be especially effective with mixes that have a high content of finer sands and particles. It can be used to achieve a homogeneous flow in mixes with high fines, a softer flow in mixes like GFRC, and can soften a mix slightly without imparting too much sag or slump. Water Reducer 420 is often used to temper mixes that have been plasticized with Water Reducer 310 or Water Reducer 205. This combination of water reducers allows the fabricator a wide range of possibilities in responding to environmental conditions.
Dosage Rate: 0.1- 2% of Cement Weight
The ultimate indicator of an overdosage of plasticizer is segregation of the mix. Make test batches prior to production to ensure optimum dosage.
Adding Water Reducers will increase workability of concrete mixes that have a low water to cement ratio. Maintaining a low water to cement ratio is critical for reaching optimal strength in the cured matrix. Read our FAQ on selecting the correct Water Reducer here: Using Water Reducers In Artisan Concrete
Reviews (0)
Be the first to write a review
Be the first to write a review
Additional info
SKU:
115885
Width:
2.25
Height:
8.00
Depth:
4.50
Shipping:
Calculated at Checkout
